Hitachi PV-XH4P handleiding
Handleiding
Je bekijkt pagina 15 van 140
EN-11
127mm.
1050mm.
Assembling the charging station
Charging station → (P.EN-12)
Hole
Mark
Groove
AC adaptor
You can charge the vacuum cleaner by connecting it to the AC adapter directly, instead of using the charging
station → (P.EN-12)
Terminal
Connector
Insert the connector
terminal into the hole until
the mark aligns with the
groove.
Protrusion
Cord
On the charging
station, insert the
cord between
protrusion and
protrusion so align
the cord in every
position.
Push the connector
in the direction
indicated by the
arrow until the
terminal is
completely vertical.
Install the charging station to the stand platform by first
connecting the stand pipe to the stand base, then assemble the
charging station to the stand pipe. Alternatively, install the
charging station to the wall with two screws and two screw
anchors, using screws appropriate for the type of wall. Please
ensure that the charging station is mounted securely.
AC adaptor
AC adaptor
Click
Click
CAUTION
Do not set the vacuum cleaner on
the charging station if the vacuum
cleaner is being used as a
hand-held vacuum cleaner.
The vacuum cleaner might fall off
of the charging station, causing
injury or damage to the floor.
Wall bracket
Stand pipe
Stand base
On the charging stand On the wall
Bekijk gratis de handleiding van Hitachi PV-XH4P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | PV-XH4P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 29352 MB |
