Hitachi PV-XH3M handleiding
Handleiding
Je bekijkt pagina 23 van 38
EN-23
Cleaning the filters
Clean filter
Open the clean filter.
Remove dust and debris from the clean filter.
Attach the clean filter.
Close the clean filter.
Attach the clean filter in the
reverse order of removal.
Press firmly until you hear a “click”
sound.
Clean filter
Clean filter
Attach
Click
Set the dust case on the
floor.
Detach the clean filter. Remove attached dust and debris by using
the maintenance brush.
Grab and hold the lower part of the dust case, lift up the
knobs of the clean filter, and open the cover in the direction
indicated by the arrow.
Dust case
Knobs
Clean filter
Maintenance brush
Sponge filter
Detach
Wash the sponge
filter with water if
there is dirt on the
filter. → (P.EN-27)
Clean filter
Perform maintenance (wash with water) when you are concerned about dirt or the suction power is weak. → (P.EN-27)
When removing dust and debris, do not slap the clean filter
onto the floor, etc. Failure to do so might cause damage.
Be sure to attach the sponge filter after emptying the
dust case or cleaning the filters.
To clean the clean filter, use the maintenance brush that
was provided with the vacuum cleaner.
Note
Make sure the sponge
filter is attached.
Note
Bekijk gratis de handleiding van Hitachi PV-XH3M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | PV-XH3M |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6025 MB |
