Hisense WZXX90-BEW001 handleiding
Handleiding
Je bekijkt pagina 2 van 2
4
3
5
3.
Draw the water box, and empty it if there is residual condensate water in
it. (This step can be ignored for new machines)
5.
Install the left and right fixing clips on the left and right supports
respectively as shown in the figure, and then fix them with 2 round head
screws.
4.
Take out the drawer board and place dryer on the rail of supporting
bracket. Make sure that 2 feet at the back are placed according to the
diagram, then push in direction of the arrow. Finally put all 4 feet in the
socket of the bracket based on the diagram.
6
6. Check whether the whole machine is firmly installed.
After installation, you can use an additional drain pipe to connect to the original drainage pipe, floor drain or water box.
Bekijk gratis de handleiding van Hisense WZXX90-BEW001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | WZXX90-BEW001 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 427 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 4500 g |
| Breedte | 595 mm |
| Diepte | 590 mm |
| Hoogte | 45 mm |
