Hisense WFGC101439VM handleiding
Handleiding
Je bekijkt pagina 19 van 71
Connection to water supply
Attach the hose to the water tap by screwing it onto the thread.
A AQUA - STOP (only with
some models)
If an internal tube or hose is
damaged, a shut-off system
is activated that cuts the
water supply to the washing
machine. In such case, the
control glass (a) will turn red.
Replace the water supply
hose.
B REGULAR
CONNECTION
INFORMATION!
For normal washing machine operation, the pressure in the water mains should be between 0.05
and 0.8 MPa (0.5–8 bar). Minimum dynamic water pressure can be determined by measuring the
water flow.
In 30 seconds, 1.2 litres of water should flow from a fully open tap.
INFORMATION!
Tighten the water supply hose by hand, firmly enough for the hose to have a good seal (max.
2 Nm). After connecting the hose, the seal must be checked for any leaks. Do not use pliers or
similar tools when connecting the hose as this could damage the nut thread.
INFORMATION!
Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.
INFORMATION!
When connecting the water supply hose, make sure to connect it in a way that allows adequate
and unobstructed water supply.
19
Bekijk gratis de handleiding van Hisense WFGC101439VM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | WFGC101439VM |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5333 MB |
