Hisense WF5I8043 handleiding
Handleiding
Je bekijkt pagina 35 van 50
35
INTERRUPTIONS AND CHANGING THE PROGRAM
INTERRUPTION THE PROGRAM
To stop or cancel the program during operation, you must switch off the appliance.
CHANGING THE
PROGRAM
To change the program during operation, switch the appliance off and on again, select the desired
program and extra functions, then press the "Start/Pause" button to start the new program.
PAUSE THE PROGRAM
The program can be paused at any time during program operation by pressing the "Start/Pause"
button. When the program is paused/flashing for the rest of the time on the display, the program is
paused. If the following conditions are met, the door lock will be automatically unlocked and the door
can be opened.
1. The temperature in the drum must be lower than the set safety value;
2. The water level in the drum must be lower than the set safety value.
To resume the program, please close the door first, and then press the "Start/Pause" button. The
washing/drying program is paused, and when it is restarted, the program will continue to run from
where it was interrupted. The spin program is paused, and when it is restarted, the program will start
from the beginning of the spin cycle.
ADD CLOTHES
If you need to add clothes during program operation, press the "Start/Pause" button, the program
will be paused, and the program on the display will pause/flash for the rest of the time. If the safety
conditions are met, the door lock will be automatically unlocked, and the door lock icon will go out (the
"Add Clothes" icon "
" will light up for some models), you can open the door to add clothes. If the
door lock icon does not go out, the door opening conditions are not met and you cannot add clothes
midway.
If a significant amount of extra laundry is added during washing and the water level is insufficient,
the cleaning effectiveness may decrease, as the appliance calculates water intake based on the initial
weight of the laundry. Insufficient water may also cause damage to the laundry due to friction, and the
washing time will be extended.
FAULT
In case of a fault, the program will be interrupted.
Flashing signal lights and an acoustic signal will warn about such occurrence (see chapter FAULT
CODES AND TROUBLESHOOTING), and the fault code (F: XX) will be indicated on the screen.
POWER SUPPLY FAILURE
In case of a power supply failure (power outage), the washing program is interrupted. When power
supply is restored, the
program is resumed from the point where it was interrupted.
If there is still water in the appliance after a power outage, do not open the door until you
have manually drained the water using the pump filter.
Bekijk gratis de handleiding van Hisense WF5I8043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | WF5I8043 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4237 MB |
