Handleiding
Je bekijkt pagina 18 van 28
Remote controller
1
5
13
13
The remote controller transmits signals to the system.
FAN SPEED
Used to select fan speed in sequence auto,
higher, high, medium, low and lower.
SMART(invalid for multi system)
Used to enter fuzzy logic operation directly when
the unit is on .
When the Remote controller is in standby, and the
mode is in Cooling or Dry, press this button about
5 seconds to enter the auto-clean mode and then
the indicator ” ” will display on LCD . Press SMART
or POWER or MODE button or enter the auto-clean
mode more than 30 minutes will escape from auto-clean
mode.and then the indicator ” ” will disappeared.
POWER
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
MODE
Press this button to select the operation mode.
Remote controller
5
Used to adjust the room temperature and
the timer, also real time.
DIMMER
When you press this button, all the display
of indoor unit will be closed. Press any
button to resume display.
Used to stop or start vertical adjustment
louver swinging and set the desired up/
down airflow direction.
Used to stop or start Horizontal adjustment
louver swinging and set the desired left/right
airflow direction.
QUIET
Used to set or cancel Quiet Mode operation.
ECONOMY
8℃ HEAT(optional)
IFEEL
Used to set or cancel Economy Mode
operation.
Used to start or stop 8℃ HEAT mode.
+
Press to set IFEEL Mode operation.
In IFEEL mode,the Air Conditioner
operates basis temperature sensor
fitted in remote instead of machine,
Advice to use IFEEL mode and the
remote put where the indoor unit
receive signal easily.Press this
button above 5 seconds,start or
stop IFEEL mode.
SUPER
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃ 61 ) set temp automatically ; Fast heating
operates at auto fan speed with 30℃ 86°F) set
temp automatically)
( °F
(
13
ON TIMER
Used to set or cancel the timer operation.
SLEEP
Used to set or cancel Sleep Mode operation.
CLOCK
Used to set the current time.
OFF TIMER
Used to set or cancel the timer operation.
11
9
10
16
3
4
1
2
6
8
5
12
7
7
14
15
2
13
9
12
10
11
3
1
2
6
5
7
8
4
13
14
16
19
15
SWING
SWING
1
Note: Each mode and relevant function will be further specified in following pages.
Display set timer
Display current time
ON
OFF
Dry indicator
Fan only indicator
Auto fan speed
Auto
Higher fan speed High fan speed
Cooling indicator
Medium fan speed
Lower fan speed
Auto-clean indicator
Smart indicator
Super indicator
IFEEL
Quiet indicator
Economy indicator
Sleep indicator
8℃ Heat indicator
Heating indicator
Low fan speed
SMARTSMART
Indication symbols on LCD:
Display temperature
TEMP
Bekijk gratis de handleiding van Hisense TG35VE0AG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | TG35VE0AG |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3541 MB |
