Hisense RB434N4BC1 handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 16 van 48
9. Lay the bottom door onto a smooth
surface. Undo the screw (8) and remove
the door retainer (10) and the door stop (9).
Then, use a screw (8) to attach the door
retainer supplied in the bag, and the door
stop (9). Keep the door retainer (10) in case
you need it later.
10. Remove the middle hinge cap and replace it on the opposite side.
11. Tilt the appliance backwards and remove the adjustable foot (11).
12. Undo the three screws on the bottom hinge
(14) and remove it. Remove the extra foot
(12) from the bottom hinge pin (13).
Unscrew the pin (13) from the bottom hinge
and screw it onto the opposite side of the
hinge, complete with the extra foot (12).
13. Attach the hinge (14) onto the opposite side
using the screws. The screws should be
attached in the order shown in the figure
below. First, tighten the screw 1, followed
by screws 2. Then, screw on the adjustable
feet (11).
14. Place the bottom door onto the bottom
hinge and hold them in place. Rotate the
middle hinge by 180°. Place the washer in
the correct position and adjust the position
of the middle hinge so that you can install
and fix the bottom door.
16

Bekijk gratis de handleiding van Hisense RB434N4BC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHisense
ModelRB434N4BC1
CategorieKoelkast
TaalNederlands
Grootte3310 MB