Hisense HWEP8014 handleiding
Handleiding
Je bekijkt pagina 49 van 76
Step 6: Starting the washing programme
Press the button (3) START/PAUSE.
TIME REMAINING TO PROGRAMME COMPLETION or DELAY END
time (if set) will appear on the display.
Symbols will be lit on the selected functions.
After pressing the (3) START/PAUSE button, you can choose the spinning
rate SPIN (SPINNING RATE/DRAIN/PUMP STOP) (except in the case of
the Drum clean (Self-cleaning) programme)) and CHILD LOCK; you
cannot change the other settings.
INFORMATION!
If the TIME REMAINING UNTIL PROGRAMME COMPLETION
flashes three times on the display unit, and there is an audible signal,
this means that the washing machine door is open or not closed
tightly. Close the washing machine door and press the (3) button
START/PAUSE again to resume the washing programme.
Step 7: End of the washing programme
The washing machine will indicate the end of the washing programme
with an acoustic signal and will appear on the display until the
washing machine switches into low standby mode or switches off. After
5 minutes, the sign will no longer be displayed.
1. Open the washing machine door.
2. Take the laundry from the drum.
3. Wipe the rubber door gasket and the door glass.
4. Close the door!
5. Shut off the water supply tap.
6. Switch off the washing machine (press the (1) ON/OFF button).
7. Unplug the power cord from the outlet.
49
Bekijk gratis de handleiding van Hisense HWEP8014, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HWEP8014 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5757 MB |
