Hisense HWEP8014 handleiding
Handleiding
Je bekijkt pagina 20 van 76
Connection to water supply
Attach the hose to the water tap by screwing it onto the thread.
A STANDARD
CONNECTION
B AQUA - STOP
CONNECTION
C TOTAL AQUA - STOP
CONNECTION (WITH A
FLOAT)
INFORMATION!
For normal washing machine operation, the pressure in the water mains should be between 0.05
and 0.8 MPa (0.5–8 bar). Minimum dynamic water pressure can be determined by measuring the
water flow.
In 30 seconds, 1.2 litres of water should flow from a fully open tap.
INFORMATION!
Tighten the water supply hose by hand, firmly enough for the hose to have a good seal (max.
2 Nm). After connecting the hose, the seal must be checked for any leaks. Do not use pliers or
similar tools when connecting the hose as this could damage the nut thread.
INFORMATION!
Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.
INFORMATION!
When connecting the water supply hose, make sure to connect it in a way that allows adequate
and unobstructed water supply.
20
Bekijk gratis de handleiding van Hisense HWEP8014, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HWEP8014 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5757 MB |
