Handleiding
Je bekijkt pagina 22 van 42
Installation Instructions
4. "C" type gasket specification:
1.0mm/1.5mm, thickness mark is
engraved on the gasket.
5. The door may have a certain run-in
sinking when it is loaded with food.
After a period of use, it will stabilize to
a stable state, which belongs to the
normal site. If the left and right doors
are uneven and need to be adjusted,
it is recommended that the user use
the appropriate "C" type gasket to
adjust after a period of use.
NOTE:
1. To avoid hand clamping when
inserting or disassembling the "C"
gasket, please use a tool.
2. Please take care of the "C" type gasket
to avoid children playing with the "C"
type gasket, or putting it into the
mouth.
3. When more than 1 piece of gasket is
used for a single door, there may be a
risk of gasket falling off or abnormal
opening and closing noise.
4. Disconnect the power supply of the
refrigerator before installation or
disassembly. Neglect of this may
result in serious injury or death
Door height adjustment
(if needed)
When the left and right sides of the door
uneven:
1. The height of the refrigerator door can
be inserted into the corresponding
height of the "C" type gasket at the
lower end of the corresponding door
shaft.
2. After confirming the height difference
between the left and right doors,
select the appropriate gasket, and
only 1 piece can be placed on each
door.
3. When assembling, please open the
lower side of the door and gently lift it,
and insert the gasket directly into the
gap between the door and the
rotating shaft.
The position of the "C" type gasket
Installation tool
Insert the "C" type gasket
20
Bekijk gratis de handleiding van Hisense HRSBS540BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HRSBS540BW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3540 MB |
