Handleiding
Je bekijkt pagina 28 van 42
Using your appliance
Water tank
Water Dispenser
The water stored in the tank is used in
the water dispenser and the automatic
ice maker.
To fill the water tank, please follow the
steps below:
1. Lift the water tank slightly and pull it
out.
The Water Dispenser is located at the
left fridge door. You can fetch water by
pressing the dispenser lever.
2. Open the lid and add water into the
water tank.
3. Close the lid and push the water tank
back.
Note:
The water tank can hold 3.5L of water.
If the water tank is not in place, the
“ ” icon on the control panel flickers.
Note:
In “150ml” or “500ml” mode:
When the water reaches the specified
volume, it will stop flowing out
automatically.
If you release the dispenser lever
before reaching the specified volume,
the water will also stop flowing out.
Just after the water tank is pushed in
place, when you fetch the first glass of
water, the water will slightly delay
flowing out and may not reach the
specified volume. It returns to normal
when you fetch the second glass of
water.
26
dispenser lever
Fill with potable water only.
WARNING
Bekijk gratis de handleiding van Hisense HRCD483TBW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HRCD483TBW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3234 MB |
