Handleiding
Je bekijkt pagina 10 van 32
9
TIPS REGARDING YOUR COOKWARE
• Correct choice of cookware allows optimum cooking time and gas consumption. Cookware diameter is the most
important in this respect
• If a pot or a pan is too small, the flames reaching over the edge of its bottom will damage it. Moreover, gas
consumption will be higher.
• If the pot or pan is too large, there is not enough air and the burning efficiency is decreased.
Gas hob reducer (only with some models) Use the gas hob reducer when cooking in a container of smaller diameter.
Place it on the grid over the auxiliary burner.
Burner type
Container diameter
Large (3,0 kW)
220-260 mm
Normal (1,9 kW)
180-220 mm
Auxiliary (1,0 kW)
120-180 mm
BURNER IGNITION AND OPERATION
Always press the knob before rotating it.
Cooking power levels are indicated on the knobs with a large and a small flame symbol. Rotate the knob over the large
flame position ( ) to the small flame position ( ) and back. Operating range is between the two flame symbols.
Settings between ( ) and ( ) are not recommeded. In this range, the flame is unstable and may be extinguished.
To turn off a burner, rotate the knob to the right to position ( ).
Single-handed ignition
To ignite a gas burner, press the corresponding knob and rotate it to the maximum power position. Electric spark from
the spark plug will be activated and the gas will ignite.
Two-handed ignition
To ignite a gas burner, press the corresponding knob and rotate it to the maximum power position. Press the spark
plug button.
Electric spark from the spark plug will be activated and the gas will ignite.
Electric ignition will only work if the power cord is connected to the power mains. If electric ignition does not work
due to a power supply failure or damp spark plugs, the gas can still be ignited with a match or a lighter.
After ignition, keep the knob depressed for approximately 5 more seconds until the flame is stabilized.
If the burner does not ignite in 15 seconds, close it and wait for at least 1 minute. The, repeat the ignition
process. If the flame on a burner is extinguished (regardless of the reason), close the burner and wait for 1
minute before trying to ignite it again.
Bekijk gratis de handleiding van Hisense HKS5D71BMPF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HKS5D71BMPF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4214 MB |
