Handleiding
Je bekijkt pagina 28 van 33
28
8. TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain
possible causes and notes for resolving an error message or malfunction. It is recommended to
read the tables carefully below to save your time and money that may cost for calling to the
service center.
Problem
Possible causes
What to do
The induction hob
cannot be turned on.
No power.
Make sure the induction hob is connected to
the power supply and that it is switched on.
Check whether there is a power outage in
your home or area. If you’ve checked
everything and the problem persists, call a
qualified technician.
The touch controls
are unresponsive.
The controls are locked.
Unlock the controls. See section ‘Using your
ceramic cooktop’ for instructions.
The touch controls
are difficult to
operate.
There may be a slight film of
water over the controls, or you
may be using the tip of your
finger when touching the controls.
Make sure the touch control area is dry and
use the ball of your finger when touching the
controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and smooth bases.
See ‘Choosing the right cookware’.
See ‘Care and cleaning’.
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for cookware and does not
indicate a fault.
The induction hob
makes a low
humming noise when
used on
a high heat setting.
This is caused by the technology
of induction cooking.
This is normal, but the noise should
quieten
down or disappear completely
when you
decrease the heat setting.
Fan noise coming
from the induction
hob.
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue to run
even after you’ve turned the
induction hob off.
This is normal and needs no action. Do not
switch the power to the induction hob off at
the wall while the fan is running.
Pans do not become
hot and appears in
the display.
The induction hob cannot
detect
the pan because it is not
suitable
for induction cooking.
The induction hob cannot detect
the pan because it is too small for
the cooking zone or not properly
centered on it.
Use cookware suitable for induction cooking.
See section ‘Choosing the right cookware’.
Centre the pan and make sure that its base
matches the size of the cooking zone.
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds, and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault.
Please note down the error letters and
numbers, switch the power to the induction
hob off at the wall, and contact a qualified
technician.
Bekijk gratis de handleiding van Hisense HI8532BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HI8532BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2838 MB |
