Handleiding
Je bekijkt pagina 24 van 33
24
Flush-mount Installation into The Worktop
Appliances without faceted edges or decorative frames, are suitable for flush mounting.
Installing the appliance
The appliance may only be installed into a temperature- and water-resistant countertop, such as
a countertop made of (natural) stone (marble, granite), or solid wood (the edges along the
cut-out have to be sealed). When installing into a countertop made of ceramics, wood, or glass, a
wooden sub-frame should be used. The frame is not supplied with the appliance. The appliance
may only be installed into a countertop made of other materials after you have consulted the
countertop manufacturer and obtained his express approval. Internal dimension of the basic unit
should be at least equal to the internal cutout for the appliance. This will allow simple removal of
the appliance from the countertop.
First, feed the power cord through the cutout. Place the appliance over the center of the
cutout. Connect the appliance to the power mains (see instructions for connecting the
appliance). Before
sealing the appliance, test its operation. Seal the slot between the appliance
and the countertop using
a silicone sealant. The silicone sealant used to seal the appliance
has to be temperature-resistant (to
at least 160 °C). Smooth out the silicone sealant using a
suitable tool. Observe the instructions for use
of the selected silicone sealant. Do not switch on
the appliance until the silicone sealant has dried completely.
WARNING!
Pay particular attention to built-in dimensions with (natural) stone countertops. When choosing
the silicone sealant, observe the countertop material and consult the countertop manufacturer.
Use of inappropriate.
Removing the built-in appliance
Disconnect the appliance from the power mains. Use a suitable tool to remove the silicone gasket
from
the perimeter. Remove the appliance by pushing it upwards from the bottom side.
WARNING!
Do
not attempt to remove the appliance from the upper side of countertop.
WARNING!
The service department shall only be responsible for repair and servicing of the cooking hob.
Consult your specialized kitchen equipment dealer regarding the re-installation (of the flush-
mount)
1. Silicone sealant
2.
S e a lin g tape
Bekijk gratis de handleiding van Hisense HI8532BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HI8532BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2838 MB |
