Hisense HI6432BSCE handleiding
Handleiding
Je bekijkt pagina 13 van 34
Cooking zone
The base diameter of induction cookware
Minimum (mm)
Maximum (mm)
1,2
120
220
3
100
150
4
140
210
flex induction
210
220x380
4.4. How to Use
Start Cooking
•
Touch the ON/OFF button. After switching on, a signal tone sounds and “ - " is
displayed on the control elements for selecting the heating zones , which means
that the induction hob is in standby mode.
•
Place a suitable pan on the cooking zone that you wish to use.
-
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
2. Each hob has its own independent slider, boost, timing
operation button, which can independently operate the power
level/timing function.
3. Adjust heat setting by touching the slider control.
-
If you don’t choose a heat setting within 20 seconds, the Induction hob will automatically
switch off. You will need to start again at step 1.
-
You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat setting
This means that:
•
You have not placed a pan on the correct cooking zone or,
•
The pan you are using is not suitable for induction cooking or,
•
The pan is too small or is not correctly centered on the cooking zone.
Heating only takes place if there is a suitable pan on the cooking zone.
The display switches off automatically after 1 minute if there is no suitable cookware on the
cooking zone.
Power up
Power down
13
Bekijk gratis de handleiding van Hisense HI6432BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HI6432BSCE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2925 MB |
