Handleiding
Je bekijkt pagina 11 van 26
11
Warning:
The whole hob can take in charge a maximum power of 3000W. Consequently, the hob automatically reduces the
maximum output power by allowing a maximum sum of the all power levels of 12
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on it.
3.3.2 Finish cooking
Touching the heating zone selection control that you wish to
switch off
Turn the cooking zone off by scrolling down to “0” or touching
“-” and “+” control together. Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving
function if you want to heat further pans, use the hotplate
that is still hot.
3.3.3 Using the Boost function
Activate the boost function
Bekijk gratis de handleiding van Hisense HI6401BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HI6401BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2472 MB |
