Handleiding
Je bekijkt pagina 39 van 48
5.3 Induction cookware
The magnet test: Use a small magnet to check whether the pan or pot
bottom is ferromagnetic. If the magnet sticks to the bottom of the pan,
then it is suitable for an induction cooker.
Make sure the pot or pan is in the middle of the cooking zone
For best cooking results, the ferromagnetic area on the cookware bottom
should match the size of the cooking zone. If the cooking zone does not
recognize the pan, try placing it on a different cooking zone with a smaller
diameter.
Unsuitable cookwareSuitable cookware
glasssteel
alloy steel with copper bottomenamel-coated steel
alloy steel with aluminium bottomcast iron
• When using a pressure cooker, keep an eye on it until the right pressure is reached. First, set the
cooking zone to maximum power; then, following the pressure cooker manufacturer's instructions,
decrease the cooking power when appropriate.
• Make sure there is enough liquid in the pressure cooker, or any other pot or pan. Due to overheating,
using an empty pot on the cooking zone may result in damage to both the pot and the cooking
zone.
• Some cookware does not have a fully ferromagnetic bottom. In such case, only the magnetic part
will heat up, while the rest of the bottom will remain cool.
• When using special cookware, observe the manufacturer's instructions.
• Pan bottom has to be flat.
Minimum pan bottom diameterCooking zone
Ø 90 mmØ 145 mm
Ø 110 mmØ 180 mm
Ø 110 mmØ 230 mm
39
Bekijk gratis de handleiding van Hisense HEH8432BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HEH8432BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3960 MB |
