Handleiding
Je bekijkt pagina 33 van 48
Table continued from last page
DescriptionKey/display
1 - Automatic (default setting)
Clean grease filters indicator
In this setting, choose the degree of use of the induction hob (with extractor)
to determine when the grease filter needs to be cleaned. Cleaning the grease
filter is shown with an indication. There are 3 options available:
1 - No to limited use of cooking oils (P1) [cleaning every 40 hours].
2 - Moderate use of cooking oils (P2) (standard) [cleaning every 20 hours].
3 - Heavy use of cooking oils (P3) [cleaning every 10 hours].
4 - Indication switched off (OFF)
Extraction sensitivity level
Set a sensitivity level for automatic extraction (Hod function enabled)
depending on the power level of the cooking zones. There are 3 sensitivity
levels adjustable:
1 - Extraction setting (L1) adjustable up to a maximum of level 5
2 - Extraction setting (L2) adjustable up to a maximum of level 7
3 - Extraction setting (L3) adjustable up to a maximum of level 9
Restoring to factory settings
Touch level 1 of the slider from the front right cooking zone for 3 seconds
to reset the settings to factory defaults.
4.15 Operating the extraction module
The extraction is set to 'Auto Start extraction' by default (symbol 'A' lights up). The extractor starts
automatically when a cooking zone is used. The level of extraction is adapted to the selected power
of the cooking zone depending on the set extraction sensitivity level (see chapter 'User settings'). The
extraction can also be set to manual use.
Setting the extraction manually:
1. Touch the slider to start extraction. A sound signal confirms the correct operation of the slider.
2. Touch or swipe the slider to set a higher or lower extraction.
• There are 9 extraction levels and a boost level available.
• After 10 minutes, the boost level automatically switches back to setting 9.
3. Switch off the extraction by setting the extraction to 0 (zero) with the slider.
INFORMATION!
The 'Auto Start extraction' can also be switched on by touching the 'A' key. The extractor
display now shows the current automatic extraction mode. Touching the 'A' key again switches
the 'Auto Start extraction' off (back to manual operation).
33
Bekijk gratis de handleiding van Hisense HEH8432BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HEH8432BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3960 MB |
