Handleiding
Je bekijkt pagina 33 van 52
Table continued from last page
DescriptionKey/display
Set a sensitivity level for automatic extraction (Hod function enabled)
depending on the power level of the cooking zones. There are 3 sensitivity
levels adjustable:
1 - Extraction setting (L1) adjustable up to a maximum of level 5
2 - Extraction setting (L2) adjustable up to a maximum of level 7 (default)
3 - Extraction setting (L3) adjustable up to a maximum of level 9
Restoring to factory settings
Touch level 1 of the slider from the front right cooking zone for 3 seconds
to reset the settings to factory defaults.
4.15 Operating the extraction module
The extraction is set to 'Auto Start extraction' by default (symbol 'A' lights up). The extractor starts
automatically when a cooking zone is used. The level of extraction is adapted to the selected power
of the cooking zone depending on the set extraction sensitivity level (see chapter 'User settings'). The
extraction can also be set to manual use.
Setting the extraction manually:
1. Touch key or on the extraction to start it. An acoustic signal confirms correct operation of
the key. The extraction level is shown in the extraction display.
• Touch key ; the extraction starts at level 6.
• Touch key ; the extraction starts at level 3.
2. Touch key or to set a higher or lower extraction.
• There are 9 extraction levels and a boost level available.
• If key or is touched for 0.5 second, the extraction cycles in steps, each step followed by
an acoustic signal. Release the key when the desired position is reached.
• After 10 minutes, the boost level automatically switches back to setting 9.
• Extraction can be switched from manual operation to 'Auto Start extraction' by touching
key (even if manual operation is set in the 'User settings').
3.
Switch off the extraction using key to set the extraction to 0 (zero) or by touch and hold
key 2 seconds.
INFORMATION!
The 'Auto Start extraction' can be switched on- or off by touching key or via the settings
menu (see chapter 'User settings'). Symbol 'A' indicates that 'Auto Start extraction' is switched
on.
Clean Air function
With the Clean Air function, after switching off the induction hob, the extractor is switched on every
hour for 10 minutes to refresh the air in the kitchen.
• The Clean Air function works for a maximum of 24 hours.
33
Bekijk gratis de handleiding van Hisense HEH6432B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HEH6432B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4188 MB |
