Handleiding
Je bekijkt pagina 14 van 52
• Before connecting the appliance, make sure the voltage indicated on the rating plate conforms
to the voltage in your power mains.
• The connection should be adjusted to the current and fuses.
• The appliance should not be connected to the mains via a multi-plug adapter or extension cable,
as the safe use of the equipment cannot be guaranteed.
• After installation, the parts carrying electrical current and insulated parts shall be protected against
contact.
WARNING!
Do not test correct operation when the appliance is on its underside. The appliance must be fully
installed when the extractor is tested.
Determining the electrical connection available in the house
INFORMATION!
Check the voltage. Before connecting the appliance, make sure the voltage specified on the
rating plate conforms to the voltage of your power mains. The voltage of your power mains
(220–240 V between L and N) should be checked by an expert using an appropriate measuring
device.
Check the voltages present as indicated in the diagrams below.
1 phase - 1 neutral2 phases - 1 neutral3 phases - 1 neutral
Attaching the power cord to the appliance
INFORMATION!
Refer to the wiring diagrams located at the bottom of the appliance.
1. Open the cover of the connection terminal box.
2. Run the power cord through a cord strain relief (clamp) which protects
the cable from being pulled out.
3. Connect the wires according to your type of appliance.
4. Make the necessary connections between the terminals using the
supplied terminal bridges. The terminal bridges are located in the
connection box.
14
Bekijk gratis de handleiding van Hisense HEH6432B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HEH6432B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4188 MB |
