Handleiding
Je bekijkt pagina 11 van 22
2
Installing the Stand or Wall mount bracket
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in accessory tightly.
Installing the Stand
Screws: ST4 x 14F
Screws: ST4 x 14F
Base Stand
Base Stand
Bekijk gratis de handleiding van Hisense H32B5100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | H32B5100 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 1799 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht verpakking | 5800 g |
| Breedte verpakking | 826 mm |
| Diepte verpakking | 137 mm |
| Hoogte verpakking | 523 mm |
