Handleiding
Je bekijkt pagina 24 van 49
24
TRANSPORTATION AFTER INSTALLATION
If you need to transport an installed appliance, first unplug the power plug, detach the drain hose, and
ensure the door is closed properly.
After each drying program, a small amount of condensation may remain in the appliance. Start the
appliance, select any program, and run it for about half a minute to drain the accumulated water to
prevent damage to the appliance during transportation. If it is not possible to transport the appliance
upright, please tilt it to the left.
Pack all packaging materials (plastic bags, other plastic parts, etc.).
The appliance is heavy; please use at least two people to move it. When transporting, do not hold
protruding parts such as the door, top cover, etc., to prevent them from falling off or being damaged.
After transport, let the appliance sit for at least 2 hours before connecting it to the power supply.
The device should be installed and connected by trained technicians.
Read the instructions carefully before reconnecting the appliance. Damage caused by improper
connection or use is not covered by the warranty.
If the appliance was not transported according to the instructions, it should be allowed to rest
for at least 24hours before connecting it to the power supply. Failure to do so may lead to heat pump
failure, and such failures are not covered by the warranty. Be careful not to damage the cooling
system; please refer to "Installation and connection".
Transport and Handling Method
Handling Method
Bekijk gratis de handleiding van Hisense DH5I104BBAB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | DH5I104BBAB |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3509 MB |
