Handleiding
Je bekijkt pagina 21 van 49
21
4
Unscrew the two screws
of the hinge cover plate,
pull it out horizontally with a little
force, and then remove the two
screws (stainless steel pan head
screws) on the reinforcing iron
plate. And press the door body
with one hand, grasp the hinge
with the other hand, lift it up little
by little, and slowly remove the
hinge from the positioning pin.
If necessary, use a flat head
screwdriver to pry it.
5
Rotate the hinge assembly
180° to the other side,
install the hinge assembly on the
stud and press it tightly, and then
tighten the two screws in the
middle.
6
Rotate the hinge cover
plate and the door hook
cover plate 180° respectively and
install them at the corresponding
positions on the other side of the
inner frame, and then tighten the
screws.
7
Remove the door lock screw
of front assembly pull down
the door lock vertically by hand,
take it down and rotate it 180° to
the other side. Then install it to
the hole of front assembly, pull it
down to clamp it, and tighten the
screws. Now, the reversing of
door lock is completed.
8
Finally, install the door
hinge on the front assembly,
tighten the two screws, and close
the door. At present, the door
reversing (from left opening to
right opening) is completed.
Bekijk gratis de handleiding van Hisense DH5I104BBAB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | DH5I104BBAB |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3509 MB |
