Handleiding
Je bekijkt pagina 70 van 80
Troubleshooting
• Some electrical appliances may affect the TV. For example, microwaves used close to the TV may cause
noise on analogue and digital channels. If you turn off the appliance and the interference disappears, it
proves that the appliance does affect the picture performance. Please move it further away from your TV.
The brightness cannot be adjusted.
•
Check Light Sensor settings at > Settings > Display & Sound > Picture > General > Automatic
Light Sensor. If Automatic Light Sensor is on, remove the objects that may block the TV light sensor.
•
Turn off Automatic Light Sensor. Press button on your remote control and select Settings >
Display & Sound > Picture > General > Light Sensor Shift to adjust the setting.
Note:
• The light sensor feature settings may not be applicable in some models/countries/regions.
Sound Issues
Please check the items below.
There is a delay between the picture and sound.
Sound is distorted or cuts out momentarily.
Volume cannot be changed or it changes on its own.
There is a delay between the picture and sound.
•
Press button on your remote control and select Settings > Display & Sound > Sound > Digital
Audio Output > Digital Audio Delay. Set the value to 0.
•
Press button on your remote control and select Settings > Display & Sound > Sound > TV
Sound Effect > Lip Sync. Adjust the value as you desire.
• Check the signal information. If the signal is weak or poor, a delay between the picture and sound may
occur but it is not a malfunction.
Note:
• Options may not be applicable depending on your model/country/region and the Audio Output you select.
Please refer to the specific product.
Sound is distorted or cuts out momentarily.
• Some electrical appliances may affect the TV. For example, microwaves used close to the TV may cause
noise on analogue and digital channels. If you turn off the appliance and the interference disappears, it
proves that the appliance does affect the picture performance. Please move it further away from your TV.
• Make sure that the connection cable or the cable connector is not damaged.
• If you use an external audio output device, make sure that the audio cable is connected to the correct
audio output connector on the external device. Place the device as close as possible to the TV without any
obstacles between them.
• Check the signal Information. A weak or poor signal may cause sound distortion, but it is not a malfunction.
66
Bekijk gratis de handleiding van Hisense 65U6N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 65U6N |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6110 MB |
