Handleiding
Je bekijkt pagina 27 van 288
Connecting to External Devices
2. If your remote control fails to pair with TV, keep the remote control within 10 feet (304.8 cm) from the TV.
You can choose one of the following ways to pair:
Method1: While holding button, press button for 3 seconds.
Method2: Press and hold / button at least 3 seconds to start pairing.
Note:
• For some remotes, it can only function after the TV software is updated.
•
If your remote control fails to pair with TV, check the Bluetooth is set On by pressing button to select
Settings > Remotes & Accessories > Bluetooth to On.
• This function may not be applicable in some models/countries/regions.
• If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
• If an error occurred with the remote control while using sufficiently charged batteries, you can take out the
batteries for 1~2 seconds then insert them back again. Now the remote control will work normally.
• The remote control cannot be paired to the TV while the TV is in standby mode.
Use HDMI&CEC
Use the TV's remote to control external devices that are connected to the TV by an HDMI cable. The external
devices need to support HDMI&CEC function.
Options may differ depending on your model/country/region and the content you are watching. Please refer to
the specific product.
HDMI format function
Press button to select Settings > Channels & Inputs > External Inputs > HDMI Format.
Please select Enhanced Format or Enhanced Pro if your HDMI device supports 4K HDR. If it does not
support 4K HDR, please select Standard Format. If you are not sure, please select Auto.
Note:
• This function may not be applicable in some models/countries/regions.
• The options above will vary depending on the model variant used.
• HDMI cables must be used to connect HDMI & CEC compatible devices to your TV.
• The HDMI & CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI & CEC compatible, all the HDMI & CEC control features
do not work.
• If the connected HDMI device does not support HDMI & CEC control, the feature will not work.
• The HDMI & CEC feature supports One Touch Play, Routing Control, System Standby, Device OSD Name
Transfer, Remote Control Pass Through, Give Device Power Status, System Audio Control.
Connecting an external device through HDMI&CEC function
Press button to select Settings > Channels & Inputs > External Inputs > HDMI control.
1. Set HDMI control to On.
2. Connect an HDMI&CEC compliant device to the TV.
23
Bekijk gratis de handleiding van Hisense 55U8QG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 55U8QG |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 24897 MB |
