Handleiding
Je bekijkt pagina 7 van 18
1
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 base stands and 1 base cover from the upper cushion.
3. Insert the base stands into the bottom slots of the TV and secure stands with the 4
screws in accessory tightly.
Installation
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Installing the stand
Follow the illustrations and textual instructions below to complete the installation steps:
Base Stand
Screws:
M5×12(55")
M5×16(65"/75")
Base Stand
4. Two people set up your TV upright on its stands and move the TV to a flat surface.
5. Insert the base cover into the 2 base stands from the TV front as the illustration
shows.
1
Put the base cover on the base stands, and push forward from the starting positions.
NOTE
Some models may not have the arrow marks, please refer to the specific product.
For 55"/65"/75"
Bekijk gratis de handleiding van Hisense 55U7QAU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 55U7QAU |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 1732 MB |
