Handleiding
Je bekijkt pagina 37 van 41
30
Send Remote
Controller Key
Code
DD FF 00 08 C1 17
00 00 xx zz zz yy BB
CC
ex: send menu key: zz zz = 00
00
DDFF0008C1170000010
000DFBBCC
zz zz = 00 00 - Menu; 00 01
- UP, 00 02 - DOWN, 00 03 -
LEFT, 00 04 - RIGHT
，
00 05
- OK
，
00 06 - Return, 00 07 -
Source
AB AB 00 08 C1
17 00 00 xx zz
zz yy CD CD
Open Settings DD FF 00 06 C1 41
00 00 xx yy BB CC
AB AB 00 06 C1
41 00 00 xx yy
CD CD
Open Home DD FF 00 06 C1 FF
00 1A xx yy BB CC
DDFF0006C1FF001A
0123BBCC
AB AB 00 06 C1
FF 00 1A xx yy
CD CD
Open CMS DD FF 00 06 C1 FF
00 13 xx yy BB CC
DDFF0006C1FF0013012
ABBCC
AB AB 00 06 C1
FF 00 13 xx yy
CD CD
Open
ScreenShare
DD FF 00 06 C1 43
00 00 xx yy BB CC
DDFF0006C1430000018
5BBCC
AB AB 00 06 C1
43 00 00 xx yy
CD CD
Turn on
Hotspot
DD FF 00 06 C1 44
00 00 xx yy BB CC
DDFF0006C1440000018
2BBCC
AB AB 00 06 C1
44 00 00 xx yy
CD CD
Take
Screenshot
DD FF 00 06 C1 4B
00 00 xx yy BB CC
DDFF0006C14B0000018
DBBCC
AB AB 00 06 C1
4B 00 00 xx yy
CD CD
Freeze
Screen
DD FF 00 07 C1 0F
08 00 xx zz yy BB
CC
DD FF 00 07 C1 0F 08 00 01
01 C1 BB CC
zz = 01 - freeze; 00 – unfreeze
AB AB 00 07 C1
0F 08 00 xx zz
yy CD CD
[Note]
·
The range of BoardID is from 01 to FF, supporting 255 machines to be networked together. 00
is the broadcast address, the commands issued by this ID will be executed by all MFPs, but
the commands will not be returned.
·
When all the commands received from TV terminal are returned to PC terminal, the start code
should be changed to AB AB, and the end code should be changed to CD CD.
·
Note for programming of control terminal: For power-on instruction, after power-on action is
executed, it returns AB AB 00 08 C1 15 00 00 XX BB BB XX CD CD (refer to the above table
for the meaning of XX); if the instruction is not received, it is necessary to send the power-
on instruction again. after TV is turned on, the PC will receive AB AB 00 08 C1 15 00 00
00 XX BB BB XX CD CD again, and then the PC can send the control instruction. After the
TV is switched on, the PC will receive the command again, then the PC can send control
commands to the TV; if any command is not returned correctly, the interval between sending
the command again should be more than 500ms.
·
When TV is in sleep state, only power-on command and query command are supported.
·
The functions of different models may vary, please refer to the actual model.
Bekijk gratis de handleiding van Hisense 55DP30FE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 55DP30FE |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2693 MB |
