Hisense 46VW25E handleiding
Handleiding
Je bekijkt pagina 34 van 37
27
Query Serial
Port ID
DD FF 00 06 C1 1B
10 00 xx yy BB CC
DD FF 00 06 C1 1B 10 00
64 A8 BB CC
AB AB 00 06 C1 1B
10 00 xx zz yy CD
CD
zz: serial port ID.
Settings -> signal
manager -> serial
port ID
Query brand DD FF 00 06 C1 FE
00 01 xx yy BB CC
DD FF 00 06 C1 FE 00 01
64 5C BB CC
AB AB 00 06 C1 FE
00 01 xx zz…zz yy
CD CD
zz…zz: brand. ex:
hisense (ASCII)
Query model DD FF 00 06 C1 FE
00 02 xx yy BB CC
DD FF 00 06 C1 FE 00 02
64 5F BB CC
AB AB 00 06 C1 FE
00 02 xx zz…zz yy
CD CD
zz…zz: model name
Send Remote
Controller Key
Code
DD FF 00 08 C1 17
00 00 xx zz zz yy BB
CC
ex: send menu key: zz zz =
00 00
DDFF0008C1170000010
000DFBBCC
zz zz = 00 00 - Menu; 00
01 - UP, 00 02 - DOWN,
00 03 - LEFT, 00 04 -
RIGHT
，
00 05 - OK
，
00
06 - Return, 00 07 - Source
AB AB 00 08 C1 17
00 00 xx zz zz yy CD
CD
Open Settings DD FF 00 06 C1 41
00 00 xx yy BB CC
AB AB 00 06 C1 41
00 00 xx yy CD CD
Open Home DD FF 00 06 C1 FF
00 1A xx yy BB CC
DDFF0006C1FF001A
0123BBCC
AB AB 00 06 C1 FF
00 1A xx yy CD CD
Open CMS DD FF 00 06 C1 FF
00 13 xx yy BB CC
DDFF0006C1FF0013012
ABBCC
AB AB 00 06 C1 FF
00 13 xx yy CD CD
Take
Screenshot
DD FF 00 06 C1 4B
00 00 xx yy BB CC
DDFF0006C14B0000018
DBBCC
AB AB 00 06 C1 4B
00 00 xx yy CD CD
[Note]
·
The range of BoardID is from 01 to FF, supporting 255 machines to be networked
together. 00 is the broadcast address, the commands issued by this ID will be executed
by all, but the commands will not be returned.
·
When all the commands received from TV terminal are returned to PC terminal, the start
code should be changed to AB AB, and the end code should be changed to CD CD.
·
Note for programming of control terminal: For power-on instruction, after power-on
action is executed, it returns AB AB 00 08 C1 15 00 00 XX BB BB XX CD CD (refer to
the above table for the meaning of XX); if the instruction is not received, it is necessary
to send the power-on instruction again. after TV is turned on, the PC will receive AB
AB 00 08 C1 15 00 00 00 XX BB BB XX CD CD again, and then the PC can send the
control instruction. After the TV is switched on, the PC will receive the command again,
then the PC can send control commands to the TV; if any command is not returned
correctly, the interval between sending the command again should be more than 500ms.
·
When TV is in sleep state, only power-on command and query command are supported.
Bekijk gratis de handleiding van Hisense 46VW25E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 46VW25E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2422 MB |
