Hilti PX 10 handleiding
Handleiding
Je bekijkt pagina 21 van 352
*2171411*
2171411 English 15
receiver mode and is then compatible with the PMA 31G laser receiver. Receiver mode can be deactivated
by again pressing and holding the selector button for a short time or by switching the tool off.
3.4 Items supplied
Multi-line laser, toolbox, operating instructions, manufacturer’s certificate.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
3.5 Information displayed during operation
Status Meaning
The laser beam blinks twice every 10 seconds
(pendulum not locked) or every 2 seconds (pen-
dulum locked).
The batteries are almost exhausted.
The laser beam blinks five times and then remains
permanently on.
Activation or deactivation of receiver mode.
The laser beam blinks very rapidly. The tool cannot level itself.
The laser beam blinks every 5 seconds. Inclined line operating mode; the pendulum is
locked, so the lines are not leveled.
4 Technical data
Range of the lines and intersection
point without laser receiver
20 m
(65 ft - 10 in)
Range, lines and intersection point
with laser receiver
2 m … 50 m
(6 ft - 10 in … 164 ft)
Self-leveling time (typical)
3 s
Laser class
Class 2, visible, 510-660 nm (EN 60825-1:2008 / IEC 60825-
1:2007); Class II (CFR 21 § 1040 (FDA))
Line width (distance 5 m)
< 2.2 mm
(< 0.09 in)
Self-leveling range
±3.0° (typical)
Accuracy
± 2 mm in 10 m
(± 0.1 in in 32 ft - 10 in)
Operating status indicator
Laser beams and the switch positions “Off”, “On locked” and
“On unlocked”
Power source
Hilti B 12 Li-ion battery
Battery life (all lines on)
Hilti B12 Li-ion battery, 2600 mAh, temperature +24 °C (+72 °F):
7 h (typical)
Battery life (horizontal or vertical
lines on)
Hilti B 12 Li-ion battery, 2600 mAh, temperature +24 °C (+72
°F): 10 h (typical)
Operating temperature
−10 ℃ … 40 ℃
(14 ℉ … 104 ℉)
Storage temperature
−25 ℃ … 63 ℃
(−13 ℉ … 145 ℉)
Dust and water spray protection
(except battery compartment)
IP 54 in accordance with IEC 60529
Tripod thread
BSW 5/8"UNC1/4"
Beam divergence
0.05 mrad … 0.08 mrad
Average output power (max.)
< 0.95 mW
Weight including battery
1.24 kg
(2.73 lb)
Bekijk gratis de handleiding van Hilti PX 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | PX 10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42346 MB |
