Hilti NCR 60 DC-22 handleiding
Handleiding
Je bekijkt pagina 13 van 48
*2321725*
2321725 9
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated in the technical data.
▶ Do not store batteries on the charger. Always remove the battery from the charger when the charging operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind glass.
▶ Store the product and batteries where they cannot be accessed by children or unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the product and the batteries for damage.
Troubleshooting
If a problem occurs, always observe the status indicator of the battery. See the section headed Status indicators of the Liion battery.
If the trouble you are experiencing is not listed in this table or you are unable to rectify the problem by yourself, contact Hilti Service.
Trouble or fault Possible cause Action to be taken
The battery runs down more quickly
than usual.
Very low ambient temperature. ▶ Allow the battery to warm up slowly to
room temperature.
The battery doesn’t engage with an
audible click.
The retaining lugs on the battery are dirty. ▶ Clean the retaining lugs and refit the
battery.
Red LED => lights continuously and a
warning tone is emitted.
Technical problem. ▶ Contact Hilti Service.
Red LED => flashes at short intervals
and a warning tone is emitted.
The state of charge of the battery is too low to
allow a complete operating cycle.
▶ Change the battery and charge the empty
battery.
Red LED => flashes at long intervals
and a warning tone is emitted.
Crimping / pressing pressure not achieved
(tool was used incorrectly).
▶ Make sure that the tool is used correctly
and check the crimped / pressed part if
unsure.
Red LED => lights briefly and no warn-
ing tone is emitted.
Product overheated. ▶ Allow the product to cool down.
LEDs of the battery show nothing Battery faulty. ▶ Contact Hilti Service.
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for
disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be correctly separated before they
can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Further information
For more information on operation, technology, environment, RoHS declaration (markets in China and Taiwan only) and recycling, follow this
link: qr.hilti.com/manual?id=2321725
This link is also to be found in these operating instructions in the form of a QR code, indicated by the symbol .
fr Mode d'emploi original
Indications relatives au mode d'emploi
À propos de ce mode d'emploi
• Avertissement ! Il convient de lire et comprendre toute la documentation jointe, y compris, sans s'y limiter, les instructions, avertissements
de sécurité, illustration et spécifications fournies avec le présent produit. Prenez connaissance de toutes les instructions, avertissements de
sécurité, illustrations, spécifications et fonctions du produit avant de l'utiliser. Tout manquement à cette obligation peut entraîner un choc
électrique, un incendie, et/ou des blessures graves. Conservez l'ensemble des avertissements et instructions pour consultation ultérieure.
•
Les produits sont destinés aux professionnels et ne doivent être utilisés, entretenus et réparés que par un personnel autorisé
et formé. Ce personnel doit être spécialement instruit quant aux dangers inhérents à l'utilisation de l'appareil. Le produit et ses accessoires
peuvent s'avérer dangereux s'ils sont utilisés de manière incorrecte par un personnel non qualifié ou de manière non conforme à l'usage
prévu.
Bekijk gratis de handleiding van Hilti NCR 60 DC-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | NCR 60 DC-22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5905 MB |
