Hilti LS 15-22 handleiding
Handleiding
Je bekijkt pagina 10 van 72
6 English 2435409
*2435409*
▶ It is not permissible to use the product as a water supply pump for power tools, e.g. cutting tools,
diamond drilling machines, etc.
▶ Make sure that the product cannot roll away or fall down.
▶ Make sure that the product is standing firmly and securely.
▶ Do not transport the product by crane or with other hoists.
▶ Operate the product only with the battery-compartment cover closed.
▶ At temperatures below the freezing point, make sure that no liquids remain in the product. Frozen liquids
can cause damage when they expand inside components of the product.
▶ Use the product only in combination with water or formwork oil. Do not put other chemicals or
liquids into the liquid tank.
▶ This product is not designed for working with liquids that are hazardous to health.
▶ Put only clean water or formwork release agent into the product. Foreign matter can cause damage
to the pump. Keep the liquid tank free of sand, drilling slurry and other foreign matter.
2.3 Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
Bekijk gratis de handleiding van Hilti LS 15-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | LS 15-22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7483 MB |
