Hilti AG 600-20SE handleiding
Handleiding
Je bekijkt pagina 13 van 80
*2381081*
2381081 English 7
Workplace
▶ Apply appropriate safety measures at the opposite side of the workpiece in work that involves breaking
through. Pieces of debris could drop out and / or fall down and injure other persons.
▶ Slits cut in load-bearing walls of buildings or other structures may influence the statics of the structure,
especially when steel reinforcing bars or load-bearing components are cut through. Consult the
responsible structural engineer, architect or person in charge of the building project before beginning the
work.
Additional notes on the use of the guards
To avoid the risks below always use the correct guard, see the section headed: "Suitability of wheels for the
equipment used".
▶ If the Standard guard with front cover is used for surface grinding, the guard can touch the workpiece
and thus lead to loss of control.
▶ If a wire brush of a thickness exceeding the maximum permissible thickness is used, the wires can snag
on the guard and break.
▶ If the standard guard is used for cutting off metal with an abrasive cut-off wheel, there is an increased
risk of exposure to sparks and particles and to wheel fragments if the wheel breaks.
▶ If the standard guard is used with or without front cover for cutting or for grinding concrete or masonry,
there is a higher dust load and an increased risk of losing control of the product, which can lead to
kickbacks.
3 Description
3.1 Product overview 1
@
Spindle lock button
;
On/off switch
=
Speed regulation
%
Dust filter
&
Vibration-absorbing side handle
(
Direction-of-rotation indicator
)
Pin wrench
+
Clamping nut
§
Kwik lock quick-release lock nut (optional)
/
Abrasive cut-off wheel / abrasive grinding
wheel
:
Clamping flange with O-ring
∙
Guard
$
Spindle
£
Quick locking system
|
Guard release button
¡
Threaded socket for grip
3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metal and
mineral materials, as well as brushing and sanding, without the use of water. It may used only for dry cutting
/ grinding.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard and front cover.
• A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
Bekijk gratis de handleiding van Hilti AG 600-20SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | AG 600-20SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8376 MB |
