HiLook DVR-204U-K1 handleiding

Handleiding

12345678910111213141516171819202122232425262728/ 28

Afdrukken

Je bekijkt pagina 3 van 28

EN — Quick User Guide

2

◆ Get started for the basic usage of analog/network camera, and speed dome.

Step 1. Check the installation environment including cables, tools, and the original packaging.

Step 2. Install the memory card for local storage (if needed).

Step 3. Install the camera/speed dome to the proper place.

Step 4. Connect alarm in/out to the alarm device (if needed)

Step 5. Connect the power supply cables.

Step 6. See the procedures below:

For analog camera: Connect video cable to the VIDEO IN interface in the DVR.

For analog speed dome:

a) Connect video cable to the VIDEO IN interface in the DVR.

b) Connect RS-485 to the DVR.

c) Set DIP switch for analog speed dome.

For network camera/network speed dome:

a) Connect the network camera to a PC with a network cable.

b) Input the default IP address: 192.168.1.64.

c) Input and confirm your password and Click “OK” to finish activation.

d) Connect the camera and PC to the same router or the same switch.

e) Login the camera (default IP: 192.168.1.64) via your password.

f) Modify the IP address to the same subnet with connected router/switch.

g) Re-login with the new IP address.

Notes:

⚫ For the network camera which enables the DHCP by default, you need to activate the network camera via SADP software and

search the IP address.

⚫ NVR can also be used to activate and set the network camera.

Step 7. Power on the cameras, DVR/NVR and monitor, then you can view the image on the monitor.

Notes:

⚫ For detailed information, See the Quick Start Guide or User Manual which can be downloaded from www.hikvision.com or

www.hi-watch.eu

⚫ The functions vary depending on the models of network camera.

◆ Get started for the basic usage of digital/network video recorder.

Step 1. Install the HDD.

See detailed installation in the User Manual from www.hikvision.com or

www.hi-watch.eu according to specific model.

Step 2. Connect peripheral devices to the DVR/NVR.

Step 3. Power on the DVR/NVR, and activate it by creating a strong

password and confirming it.

Step 4. Log in to the DVR/NVR, and follow the Setup Wizard to configure

basic parameters.

You can operate and configure the device, including the live view, record

schedule, playback, backup, etc.

Note: For the detailed operation of DVR/NVR, refer to the User Manual from www.hikvision.com or www.hi-watch.eu according

to the specific model.

TECHNICAL SUPPORT

In case of any problem, please immediately contact the local after-sales service authorized by Hikvision.

Analog Camera

Analog Speed Dome

Monitor

Network Speed Dome

Monitor

NVR

DVR

TCP/IP

TCP/IP

Network Camera

SYV

SYV

12345678910111213141516171819202122232425262728/ 28

Bekijk gratis de handleiding van HiLook DVR-204U-K1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd