Hillvert HT-HBC-500 handleiding
Handleiding
Je bekijkt pagina 31 van 224
EN
3.5.1. MAINTENANCE SCHEDULE
Maintenance schedule
After 12 hours of
use
After 24 hours of
use
After 36 hours of
use
Air filter
Clean
Clean
Replace
Spark plug
Check
Clean
Replace
3.
5.2. SPARK PLUG CLEANING:
1
.
A
fter the engine has cooled, remove the spark plug using a socket wrench.
2.
C
lean the spark plug with a wire brush.
3. Use a feeler gauge to set the spark gap to between 0.6 and 0.7 mm.
4. Reinstall the spark plug by hand.
5.
T
ighten with a socket wrench.
3.
5.3. CLEANING THE AIR FILTER:
1
.
R
emove the cover and sponge from the filter.
2.
R
eplace the cover to prevent unwanted objects from falling into the tank.
3.
C
lean the air filter in warm soapy water.
4.
Ri
nse.
5.
Al
low the filter to dry thoroughly.
C
AUTION: Do not start the engine without the filter installed.
3.
5.4. STORAGE:
Bekijk gratis de handleiding van Hillvert HT-HBC-500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hillvert |
| Model | HT-HBC-500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 46864 MB |
