Hikvision ECT-D32V2 handleiding
Handleiding
Je bekijkt pagina 6 van 10
ECT-D32V2 Dome Camera Quick Start Guide
QSG ECT-D32V2 032018NA 6
Secure the Mounting Base
Note:
The supplied screw package contains both self-tapping screws and
expansion bolts.
For a cement ceiling, expansion bolts are required to fix the camera.
For a wooden ceiling, self-tapping screws are required.
5. Route the cables through the cable hole or the side opening.
6. Connect the corresponding cables such as power cable and video
cable.
7. Power on the camera to check if the image on the monitor is at an
optimum angle. If not, adjust the camera according to the figure
below to get an optimum angle.
3-Axis Adjustment
8. Fit the black liner back to the camera, and tighten the screws on the
bubble of the dome camera to finish the installation.
Bekijk gratis de handleiding van Hikvision ECT-D32V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hikvision |
| Model | ECT-D32V2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 1234 MB |
