Handleiding
Je bekijkt pagina 5 van 17
IV
Applicable Models
This manual is applicable to the model: Monitor.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Monitor User Manual
Note:
Forward tilt of the whole machine is not recommended in use;
if there is a need for forward tilt, it is recommended that the
forward tilt angle should not exceed 5 degrees.
Safety Instructions
• Proper configuration of all passwords and other security settings is the responsibility
of the installer and/or end-user.
• In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for
detailed information.
• Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100 to 240 VAC or 12 VDC according to the IEC60950-1 standard.
Please refer to technical specifications for detailed information.
• Do not connect several devices to one power adapter as adapter overload may
cause over-heating or a fire hazard.
• Please make sure that the plug is firmly connected to the power socket.
• If smoke, odor or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact the service center.
• The mains plug of the equipment is used as disconnect devices, the socket-outlet
shall be installed near the equipment and shall be easily accessible;
Bekijk gratis de handleiding van Hikvision DS-D5024F2-2P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hikvision |
| Model | DS-D5024F2-2P2 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2163 MB |
