Hestan KDW24BU handleiding
Handleiding
Je bekijkt pagina 19 van 40
FINAL STEPS
(CONT.)
GASKETS
Before securing the dishwasher to the cabinets, attach the gaskets to the sides.
1. Remove the protective tape from the adhesive surface.
2. Fix the gasket to the dishwasher, inserting it in the seat on the
sides towards the front
- Make sure that the long side of the gasket, the one with the
holes for inserting the screws, is attached to the outside of
the dishwasher. (Figure 1 below.)
- The holes in the long side must match the holes in the
dishwasher. (See A in Figure 2 below.)
Figure 3 shows the gasket in position.
3. Make sure the gasket adheres perfectly to the dishwasher.
4. Secure the dishwasher to the adjacent cabinetry or to the countertop above using the
supplied screws.
MAKE SURE THERE IS AT LEAST 1/8" [3 mm] CLEARANCE BETWEEN
THE TOP OF THE DOOR AND THE SURFACE ABOVE IT.
This operation secures the dishwasher to the adjacent cabinets or to the countertop.
5. Cover the side holes using the supplied plugs.
Figure 1
Figure 2
Figure 3
2019 Hestan Commercial Corporation
17
EN
Bekijk gratis de handleiding van Hestan KDW24BU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hestan |
| Model | KDW24BU |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9865 MB |