Hestan KDW24BU handleiding
Handleiding
Je bekijkt pagina 16 van 40
OVERLAY PANEL
(MODEL KDW24-OV)
OVERLAY PANEL PREPARATION
MOUNTING SUPPORT HOOKS AND BRACKETS
1. Place the provided template on the inner surface of the overlay panel.
2. Center the template on the panel and align it with the top edge, matching up the reference
locators (A).
3. Mark the position of the door hooks and brackets
with a pencil.
4. Remove the template and use a drill with a suitable
bit to make pilot holes at the points marked on the
panel.
• To avoid drilling too deep, use of a drill stop is
recommended.
5. Using a Phillips screwdriver, secure the door hooks (B, C) with the 8 supplied flat head screws
(items F) at the marked reference points.
6. Use the screwdriver to secure the lower
brackets (D, E) with the 8 supplied round
head screws (item G) at the marked
reference points.
A
A
©2019 Hestan Commercial Corporation
14
EN
Bekijk gratis de handleiding van Hestan KDW24BU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hestan |
| Model | KDW24BU |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9865 MB |