Heritage Audio i73 PRO 2 handleiding
Handleiding
Je bekijkt pagina 9 van 51
9
GETTING STARTED
3- Back Panel:
POWER INPUT*: To be connected to the provided power supply (12VDC).
The plug on the power supply is a locking barrel connector that prevents accidental
disconnection. The plug locks with a half-turn, creating a secure connection that can
be counted on.
*
*If there is a need to connect the OUTPUTS to an unbalanced input, please use a TRS
plug with the ring disconnected. A non-floating negative terminal will short it to the
sleeve ground and cause distortion. Please note that the Monitor outputs are not fit to
send CV/Gate signals to analog devices. You can use the headphone outputa from
your i73® PRO ONE for that matter.
USB-C CONNECTOR: USB-C connector to computer.
USER MANUAL
1
1
2
6 7 8
9
10
3
4 5
2
ON/OFF SWITCH: Activates the i73® PRO EDGE.
3
MIDI IN/OUT: Mini MIDI port to be used with CBL 202 Mini MIDI to 2 MIDI IN
and OUT cable.
4
ADAT IN/OUT: Digital Input and Output on optical ADAT format.
5
OUTPUT 3&4**: 1/4″ TRS Balanced jacks.
6
MONITOR L&R OUTPUTS**: 1/4″ TRS Balanced jacks.
7
LINE INPUTS 3&4: LINE level inputs 3 and 4.
8
+4 dBu / -10 dBv switch: Helps accomodate the right entry level for INPUTS 3&4.
Typically -10 dBV would be used for "consumer" audio sources, +4 dBU for "pro"
audio sources.
9
COMBO XLR JACK INPUTS: Fully balanced +4dB. Use 1/4″ TRS jack INPUT for LINE
signals and the XLR INPUT for MIC signals.
10
HARDWARE
Bekijk gratis de handleiding van Heritage Audio i73 PRO 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heritage Audio |
| Model | i73 PRO 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18417 MB |
