Heritage Audio HERCHILD Model 670 handleiding

Niet gecategoriseerd

Heritage Audio

17 pagina's

PDF beschikbaar

Handleiding

TROUBLE SHOOTING

PROBLEMS

SOLUTIONS

There is almost no sound coming from the HERCHILD

Model 670.

Make sure you have raised the INPUT GAIN to a sufficient

level.

There doesn´t seem to be any compression taking place.

Make sure you have adjusted the AC THRESHOLD level

to a reasonable setting.

I´m getting way too much compression for what I need.

Try lowering the AC THRESHOLD.

I´m still getting way too much compression for what I

need.

Try adjusting the SC FILTER to make the HERCHILD

Model 670 less sensitive to the lower frequencies.

The HERCHILD Model 670 does not seem to be reacting

as it should.

Have you allowed the recommend 30 minutes for the unit

to warm up?

The readings on the VU meter don´t seem to correspond

with what is actually happening.

Sounds like it´s time for some calibrating.

The compression I am getting is altogether too aggressive

for what I am looking for.

Try a different setting on the DC THRESHOLD to alter the

Ratio/Knee.

The compression I am getting is still altogether too

aggressive for what I am looking for.

Try a different setting on the TIME CONST selector to

ease the attack and release controls. (See Time Constant

Settings for exact timings).

The compressor isn´t responding the way it should.

Double check to make sure you have selected the desired

mode of operation in the AGC section.

The compressor seems to be heating up excessively.

Have you installed a blank rack panel above and below

the unit to assure proper ventilation?

- - - MORE INFORMATION ON PAGE 16 - - -

- For any further doubts or questions please get in contact with us at: support@heritageaudio.com!

Bekijk gratis de handleiding van Heritage Audio HERCHILD Model 670, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.