Hendi 211526 handleiding
Handleiding
Je bekijkt pagina 7 van 80
7
GB
Main parts of the product
(Fig.1 on page 3)
1. Lid
2. Tank
3. Level indicator
4. Faucet
5. Power switch with indicator light
6. Temperature setting knob
7. Indicator lamp
8. Water tray
Remark: The content of this manual applies for all listed items
unless specified otherwise. The appearance may vary from the
shown illustrations.
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac
-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
• Clean the inside of tank with a non-abrasive detergent and
rinse with clean water.
• Make sure the tap is closed.
• Fill the appliance up to the MAX level indicated on the inner
wall of the reservoir.
• Fasten the lid securely by turning it until it locks into place.
• Plug the cord into the electric outlet, then turn the power
switch “ON”. Indicator of power switch lights up.
• Use the temperature setting knob to select the desired tem
-
perature (Maximum temperature setting is 100°C). The ac-
tual temperature can differ from the selected temperature.
Orange LED lights up.
• When the liquid has reached the selected temperature, the
orange LED lights off.
• Water boiler now ready to be served.
NOTE! This appliance is not suitable for use with milk and choc
-
olate milk.
After use / Empty the tank
• Turn off the appliance by switching off the switch and remov
-
ing the plug from the socket.
• Place a drip tray under the tap.
• Open the tap and drain the beverage out of the tank.
• When the tank has been emptied, close the tap.
RESET the safety cut-out (Hi-limiter or thermal
cut-out)
Please note that a RESET button is equipped with the appliance
to avoid overheat.
• Disconnect the appliance from the power supply.
• Allow the appliance to completely cool down.
• Press the RESET button of the Hi-limiter (thermal cut-out)
(Fig.2 on page 3). You should hear a click sound.
• Connect to the power supply and you can use it again.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be
-
fore and after use.
• Avoid water contacting the electrical components.
• Clean the inside of container with a non-abrasive detergent
and rinse with clean water.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for cleaning.
Do not use petrol or solvents!
• When you drain off beverage or dirty water, leave the tap open
and rinse the appliance with clean water.
• Clean and descale the appliance base at regular intervals
(See ==> Descaling).
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se
-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car
-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
Bekijk gratis de handleiding van Hendi 211526, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hendi |
| Model | 211526 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12044 MB |
