Helix V EIGHT DSP ULTIMATE handleiding
Handleiding
Je bekijkt pagina 20 van 36
20
General installation instructions for HELIX
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installa-
tion instructions. This product has been checked
for proper function prior to shipping and is guaran-
teed against manufacturing defects.
Before starting your installation, disconnect
the battery’s negative terminal to prevent
damage to the unit, re and / or risk of injury.
For a proper performance and to ensure full war-
ranty coverage, we strongly recommend to get this
product installed by an authorized HELIX dealer.
Install your HELIX V EIGHT DSP ULTIMATE in a
dry location with sucient air circulation for proper
cooling of the equipment. The amplier should be
secured to a solid mounting surface using proper
mounting hardware. Before mounting, carefully
examine the area around and behind the pro-
posed installation location to insure that there
are no electrical cables or components, hydraulic
brake lines or any part of the fuel tank located be-
hind the mounting surface. Failure to do so may
result in unpredictable damage to these compo-
nents and possible costly repairs to the vehicle.
General instruction for connecting the HELIX
V EIGHT DSP ULTIMATE amplier
The HELIX V EIGHT DSP ULTIMATE amplier
may only be installed in vehicles which have a
12 Volts negative terminal connected to the chas-
sis ground. Any other system could cause dam-
age to the amplier and the electrical system of
the vehicle.
The positive cable from the battery for the com-
plete system should be provided with a main fuse
at a distance of max. 30 cm from the battery. The
value of the fuse is calculated from the maximum
total current input of the car audio system.
Use only suitable cables with sucient ca-
ble cross section for the connection of HELIX
V EIGHT DSP ULTIMATE. The fuses may only
be replaced by identically rated fuses (2 x 40 A)
to avoid damage of the amplier.
Prior to installation, plan the wire routing to
avoid any possible damage to the wire harness.
All cabling should be protected against possible
crushing or pinching hazards. Also avoid routing
cables close to potential noise sources such as
electric motors, high power accessories and other
vehicle harnesses.
Congratulations!
General instructions
Dear Customer,
Congratulations on your purchase of this
innovative and high-qual ity HELIX product.
Thanks to more than 35 years of experience in
research and development of audio products
the HELIX V EIGHT DSP ULTIMATE sets new
standards in the range of digital ampliers.
We wish you many hours of enjoyment with your
new HELIX V EIGHT DSP ULTIMATE.
Yours,
AUDIOTEC FISCHER
Bekijk gratis de handleiding van Helix V EIGHT DSP ULTIMATE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Helix |
| Model | V EIGHT DSP ULTIMATE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7386 MB |
