Helix AMPLIFY 204 DIRECT handleiding
Handleiding
Je bekijkt pagina 16 van 20
16
1. Clipping LED
Normally, the Clipping LEDs are o and only
light up if one of the line inputs is overdriven.
On (red): One of the analog signal inputs is
overdriven. Reduce the input sensitivity using
the respective Gain control until the LED goes
out. Instructions on how to reduce the input
sensitivity are described on page 14, point 4.
2. Status LED
The Status LED indicates the operating mode
of the amplier.
Green: The amplier is ready for operation.
Red: Protection Mode active. A malfunction
has occurred that may have dierent root
causes. The amplier is equipped with protec-
tion circuits against over- and undervoltage
as well as overheating. Please check for con-
necting failures such as short-circuits or other
incorrect connections. If the amplier is over-
heated, the internal temperature protection
will turn o the signal output until it reaches a
safe temperature level again. If the amplier
does not turn on, it is defective and needs to
be sent to your local authorized HELIX dealer
for repair service.
Additional functions
Bekijk gratis de handleiding van Helix AMPLIFY 204 DIRECT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Helix |
| Model | AMPLIFY 204 DIRECT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2367 MB |
