Helix AMPLIFY 201 X-OVER handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 13 van 24

13

en

General installation instructions for HELIX

components

To prevent damage to the unit and possible injury,

read this manual carefully and follow all installa-

tion instructions. This product has been checked

for proper function prior to shipping and is guaran-

teed against manufacturing defects.

Before starting your installation, disconnect

the battery’s negative terminal to prevent dam-

age to the unit, re and / or risk of injury. For

a proper performance and to ensure full warran-

ty coverage, we strongly recommend to get this

product installed by an authorized HELIX dealer.

Install your AMPLIFY 201 X-OVER in a dry loca-

tion with su󰀩cient air circulation for proper cooling

of the equipment. The amplier should be secured

to a solid mounting surface using proper mounting

hardware. Before mounting, carefully examine the

area around and behind the proposed installation

location to insure that there are no electrical ca-

bles or components, hydraulic brake lines or any

part of the fuel tank located behind the mounting

surface. Failure to do so may result in unpredict-

able damage to these components and possible

costly repairs to the vehicle.

General instruction for connecting the HELIX

AMPLIFY 201 X-OVER amplier

The AMPLIFY 201 X-OVER amplier may only be

installed in motor vehicles which have a 12 Volts

negative terminal connected to the chassis

ground. Any other system could cause damage

to the amplier and the electrical system of the

vehicle.

The positive cable from the battery for the entire

sound system should be provided with a main fuse

at a distance of max. 30 cm from the battery. The

value of the fuse is calculated from the maximum

total current draw of the car audio system.

Use only suitable cables with su󰀩cient ca-

ble cross-section for the connection of the

AMPLIFY 201 X-OVER. The fuses of the ampli-

er may only be replaced by identically rated

fuses (2 x 30 A) to avoid damage of the ampli-

er.

Prior to installation, plan the wire routing to

avoid any possible damage to the wire harness.

All cabling should be protected against possible

crushing or pinching hazards. Also avoid routing

cables close to potential noise sources such as

electric motors, high power accessories and other

vehicle harnesses.

Congratulations!

General instructions

Dear Customer,

Congratulations on your purchase of this innova-

tive and high-qual ity HELIX product.

Thanks to more than 30 years of experience in

research and development of audio products

this amplier sets new standards in the range of

ampliers.

We wish you many hours of enjoyment with your

new HELIX AMPLIFY 201 X-OVER.

Yours,

AUDIOTEC FISCHER

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Helix AMPLIFY 201 X-OVER, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Helix (Niet gecategoriseerd)

Handleiding bekijken

Helix V EIGHT DSP ULTIMATE

Niet gecategoriseerd - handleiding

Handleiding bekijken

Helix AMPLIFY 204 DIRECT

Niet gecategoriseerd - handleiding

Handleiding bekijken

Helix AMPLIFY 204 X-OVER

Niet gecategoriseerd - handleiding

Handleiding bekijken

Helix AMPLIFY 201 DIRECT

Niet gecategoriseerd - handleiding

Handleiding bekijken

Helix NEXT V TWO

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd