Heinner HWM-VF4814D+++ handleiding
Handleiding
Je bekijkt pagina 38 van 86
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
37
As soon as the ma-
chine is loaded
with water, water
dis- charges.
The end of water discharging
hose is too low for the machine.
Set the water discharging hose on
appropriate height.
No water appears
in the drum
during washing.
No fault. Water is in the unseen
part of the drum.
Laundries have
detergent
residues on them.
Non-dissolving particles of some
detergents may stick to your
laundries as white spots.
Perform an Extra rinse by setting your
machine to “Rinsing” programme, or clean
the spots using a brush after your laundries
dry.
Grey spots appear
on the laundries.
The reason for such spots may be oil,
cream or ointment.
Apply the maximum amount of detergent
instructed by the detergent manufacturer in
the next washing operation.
Spinning operation is
not performed or
runs late.
No fault. Unbalanced load control
system has been activated.
Unbalanced load control system will try to
spread your laundries homogenously.
Spinning operation will begin after your
laundry is spread. Place the laundry in the
machine in a balanced fashion the next time.
Bekijk gratis de handleiding van Heinner HWM-VF4814D+++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HWM-VF4814D+++ |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 17283 MB |
