Heinner HWM-BI914IVA+++ handleiding
Handleiding
Je bekijkt pagina 3 van 91
www.heinner.com
2
•Never use flammable sprays or substances in the immediate proximity of the appliance.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified people in order to avoid a hazard.
•If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent
or similarly qualified persons. Risk of electric shock!
INSTALATION
•Remove all the packaging material and transport bolts before using the appliance. Otherwise, serious
damage may result.
•This appliance is equipped with a single inlet valve and can be connected to the cold-water supply only.
•Mains plug must be accessible after installation.
•Before washing clothes for the first time, the product shall be operated once throughout all the procedures
without any clothes inside.
•Before using the washing machine, the product shall be calibrated.
•Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
•The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
•Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05MPa.
ELECTRICAL CONNECTION
•Make sure the supply cable is not trapped by the machine; it can get damaged.
•Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical
specifications “table. The grounding installation has to be done by a qualified electrician. Ensure that the
machine is installed in accordance with the local regulations.
WARNING!
•Don´t use multiple plugs or extension cords.
•The appliance must not have an external switching device such as a timer or connected to a circuit that is
regularly switched on and off.
•Do not pull the plug out of the mains outlet if there is flammable gas around.
•Never pull out the power plug with wet hands.
•Always pull at the plug, not at the cable.
•Always unplug the appliance if it is not being used.
WATER CONNECTIONS
•Check the connections of the water inlet tubes, the water taps and the outlet hose for possible problems
due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired.
Do not use the appliance before the pipes and hoses are installed properly by qualified people.
•Glass door may become very hot during the operation. Keep children and pets far away from the machine
while it is operating.
•The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water
leakage can occur.
•Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can
leak out, and there is a risk of scalding due to hot water.
Bekijk gratis de handleiding van Heinner HWM-BI914IVA+++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HWM-BI914IVA+++ |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 21649 MB |
