Heinner HSF-M750M-WH handleiding
Handleiding
Je bekijkt pagina 22 van 45
www.heinner.com
21
6. CLEANING AND MAINTENANCE
• Cut off the power and wait for two minutes before cleaning.
• After cleaning and maintenance, wait until it is fully dry before using it or storing it.
• It is forbidden to directly rinse the body with water. Please wipe the surface lightly with a soft
cloth containing neutral detergent and then dry it. Do not use solvents such as gasoline.
• Do not disassemble the product for modification. It is recommended to check and clean this
product regularly to prolong its service life.
7. TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain
possible causes and notes for resolving an error message or malfunction. It is recommended to read
the table below carefully in order to save your time and money that may cost for calling to the
service center.
Problem
Cause
Solution
The machine does
not work properly
after installed
●
The power cable is not plugged in
or has poor contact.
Make sure the plug is properly
inserted into the socket.
●
The switch on the body is not
turned on.
Turn on the switch on the body.
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available:
Model and Serial Number.
The information can be found on the rating plate. Subject to change without notice.
Bekijk gratis de handleiding van Heinner HSF-M750M-WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HSF-M750M-WH |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 13811 MB |
