Heinner HSF-L360WH handleiding
Handleiding
Je bekijkt pagina 9 van 49
www.heinner.com
8
USE INSTRUCTION
1. ON/OFF Button
While in stand-by mode, press ON/OFF Button to change to working status and vice versa.
Pushing the power button when in operation will put it in stand-by mode.
Turning on the machine for the first time will put it in low speed mode and default mode, it will be
indicated by the light. (It will be first be put at MED speed, after 3 seconds of operating it will switch to low
speed, at a default settings without oscillation)
When connected to a power source the fan will be switched on from the previous setting. It will start at
MED speed and switch to previous setting after 3 seconds. Natural Breeze mode, Sleep mode and timer
function are not included.
2. Speed Button
The wind speed of the fan can be adjusted with this button. The key presses will be in rotation of
low→med→high, the LED will display the wind speed accordingly.
3. Time Button
The TIME button has 4 timer settings in the order of 1H → 2H →4H →8H →Off, it will be displayed
accordingly on the LED light display, time will not accumulate.
Selecting the relative settings will start the timer, once the timer runs out the machine will automatically
turn off. When reset the timer, the fan will work according to the latest setting.
Timer can be preset in stand-by mode, presets can be set to: 1H, 2H, 4H, 8H. LED light will be displayed
correspondingly, time will not accumulate.
The timer will be based on the options given in the presets, the machine will be in the mode that it was last
turned off in (Natural Breeze mode, Sleep mode and timer are not included).
4. Angle Button
Pushing the Angle button when switched on will allow different angles to be set. A total of 4 settings can be
set at 60, 90, 180, and 360 degrees, an additional press will return to the default setting. The function runs
on rotation and will be indicated on the LED light display.
Under different angled settings a long press of 3 seconds will allow the user to exit the setting.
5. Mode Button
This button is only available on the remote, it is not found on the machine itself.
The remote can adjust to different modes of wind, from Natural Breeze, Sleep, and its default setting
while the LED display will change accordingly.
For the default settings there will not be any specific wind patterns for different speeds of wind.
Natural Wind Speed chart pattern:
Bekijk gratis de handleiding van Heinner HSF-L360WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HSF-L360WH |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 11747 MB |
