Handleiding
Je bekijkt pagina 4 van 81
www.heinner.com
3
4. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the
damage that shall be incurred due to using the product without grounding according to local regulations.
5. The circuit breaker switches of the oven shall be placed so that end users can reach them when the oven
is installed.
6. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.
7. If you use an electrical appliance, e.g. a hand mixer, near the oven, make sure that the power cord does
not get caught in the oven door. The insulation of the cable can be damaged.
8. Never wash the product by spraying or pouring water on it! There is a risk of electrocution.
9. Do not use cut or damaged cords or extension cords other than the original cord.
10. Make sure that there is no liquid or humidity in the outlet where the product plug is installed.
11. The rear surface of the oven also heats up when the oven is operated. Electrical connections should not
touch the rear surface, otherwise the connections may be damaged.
12. Do not tighten the connecting cables to the oven door and do not run them over hot surfaces. If the cord
melts, this may cause the oven to short circuit and even a fire.
13. Unplug the unit during installation, maintenance, cleaning and repair.
14. Make sure the plug is inserted firmly into the wall socket to avoid sparks.
15. With a steam oven, the water container must not be immersed in water or cleaned in the dishwasher.
Otherwise, there is a risk of electric shock when the water container is placed in the steam oven.
16. Do not use steam cleaners for cleaning the product, otherwise electric shock may occur.
17. Users should not dislocate the resistance during cleaning. It may cause an electric shock.
18. An omni polar switch capable of disconnecting power supply is required for installation. Disconnection
from the power supply shall be provided with a switch or an integrated fuse installed on fixed power
supply according to building code.
19. The product is equipped with a type ‘Y'' cord cable.
20. Fixed connections shall be connected to a pow- er supply enabling omni-polar disconnection. For
appliances with over voltage category below III, dis- connection devices shall be connected to fixed power
supply according to wiring code.
21. Cable fixing points should be protected.
Gas safety
1. This appliance is not connected to burning products evacuation apparatus. This appliance must be
connected and installed according to the installation regulations in force. Conditions regarding
ventilation should be considered.
2. When a gas cooking appliance is used, humidity, heat and burning products are generated in the room.
First, make sure the kitchen is well ventilated when operating the appliance and maintain natural
ventilation openings or install mechanical ventilation equipment.
3. After using the appliance heavily for an extend- ed period of time, additional ventilation may be required.
For example, open a window or adjust a higher speed for mechanical ventilation, if any.
4. This appliance must be installed in accordance with the current regulations and only in well-ventilated
areas. Please read the instructions carefully before installing and using this appliance.
5. Before positioning the appliance, make sure local network conditions (Gas type and gas pressure) meet
appliance requirements.
6. The appliance cannot be operated for longer than 15 seconds. If the burner is not on after 15 seconds,
stop the mechanism and wait for at least one minute before trying to ignite the burner again.
7. All kinds of operations to be performed on gas installation must be performed by authorized and
competent people.
8. If you have to use your product with a different gas type than the factory delivery, you have to apply to
an authorized service for the conversion.
9. For proper operation, a hood, gas pipe and clamp should be replaced periodically according to
manufacturer’s recommendations and when required.
Bekijk gratis de handleiding van Heinner HFSC-S66FDC-BIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HFSC-S66FDC-BIX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 17897 MB |
