Handleiding
Je bekijkt pagina 16 van 81
www.heinner.com
15
7. OPERATION OF THE OVEN
Initial operation of the oven
After you have made the necessary connections of your oven according to the instructions, you shall need to
do the following in the initial operation:
1. Take out any labels or accessories that are affixed inside the oven. If there is a protective foil on the front
of the appliance, remove it.
2. Wipe the inside of the oven with a wet cloth to remove the dust and the remains of packaging. Inside of
the oven it shall be empty. Connect the appliance to gas and electricity.
3. Set the temperature adjustment knob to the highest temperature and operate the oven for 30 minutes
with the door closed. Slight smoke and odor may arise in the meantime, this is a normal situation.
4. After the oven has cooled down, wipe the inside of the oven with warm water with mild detergent and dry
with a clean cloth. You can now use your oven.
5. If your oven has a steam assisted cooking function; remove the water container from the oven. Shake the
water container well before using detergent.
Normal operation of the oven
1. To start cooking, use the temperature control knob to set the temperature at which you want to cook,
depending on the type of food, and the cooking function control knob to set the desired cooking function.
2. In the models with digital timer; when the cooking time has expired according to the information entered,
the timer turns off the heaters and gives an audible signal.
Using the grill
1. When you place the grill on the top rack, the food on the grill shall not touch the grill.
2. You can preheat for 5 minutes while grilling. If necessary, you may turn the food upside down.
3. Food shall be in the center of the grill to provide maximum air flow through the oven.
To turn on the grill
1. Place the function knob over the grill symbol.
2. Then, set it to the desired grill temperature.
To turn off the grill
Set the function knob to the off position.
WARNING: Keep the oven door closed when grilling.
COOLING FAN
During operation of the oven, the cooling fan shall move excess steam out and prevent the appliance from
overheating. This is necessary for ensuring your appliance to work well and to cook well.
The cooling fan continues to operate after cooking is finished. After cooling is complete, the fan shall
automatically turn off.
Use Of Panel Protection Sheet
Panel protection plate is designed to protect the control panel and knobs when the oven is in grill mode and
the oven door is open. When the oven is in grill mode, the panel protection plate should be used to prevent
heat damage to the control panel and knobs.
Open the front glass door of the oven Place the panel protection sheet and gently close the door and fix the
panel protection plate.
WARNING: The panel protection sheet is suitable for use with the door open.
Bekijk gratis de handleiding van Heinner HFSC-S66FDC-BIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HFSC-S66FDC-BIX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 17897 MB |
